6 .1
Teaching in a radio code
1 .
Press the hand transmitter button on hand transmitter
A
, whose radio code is
to be inherited, and keep it pressed.
– The radio code is transmitted and the LED is illuminated blue for 2 seconds
then goes out.
– After 5 seconds, the LED flashes alternately red and blue, the radio switch
transmits the radio code.
2 .
Hold the hand transmitter near the radio switch as shown in the illustration.
3 .
Press the transmitter button to which the new radio code is to be allocated,
and keep it pressed.
– The LED will flash slowly in blue.
– If the radio code is recognised, the LED flashes quickly in blue.
– After 2 seconds, the LED goes out.
NOTE:
You have 15 seconds to inherit / transmit the code. The process must be repeated
if the radio code is not successfully inherited / transmitted within this time.
4006055 RE / 10.2014
15
ENGLISH