Ensure all connections are correct before applying power. Apply power to the P300 and machinery, then
check that the output LED is flashing when the target is being sensed.
WARNING
It is crucial that all exposed rotating shafts are provided with a full guard. Therefore, this device and its
target must be equipped with a guard.
Shaft
20 mm Diameter
Ferrous Target
6mm
(Min)
Ferrous Target - 8 mm (5/16 in.) Max.
Non-Ferrous Target - 5 mm (3/16 in.) Max.
PAGE 9
P300 Shown on Optional Whirligig® Shaft Sensor
Mount with Mag-Con™ Magnetic Connector
Fasten the P300 to a suitable mounting bracket, such as 4B’s Whirligig® universal shaft sensor mount,
with the nose of the switch within the sensing range of the target, as shown below -
