49 Bespoke BATEC ELECTRIC 2, User Manual Lines

Page: 23 / 41

– 44 – – 45 –
ENG
IMPORTANT!
As the necessary maintenance varies between users, check with your BATEC
MOBILITY representative to establish a periodic maintenance schedule that
fits your specific use.
IMPORTANT!
Always do a safety check of your HANDBIKE BATEC ELECTRIC before
using. Improper maintenance may invalidate the warranty.
Greasing the transmission mechanism:
Apply a drop of grease or light coat of Teflon spray to the transmission
mechanism, after removing the old grease. After applying, remove any
excess grease.
Having HANDBIKE BATEC ELECTRIC serviced by an authorised distributor:
The recommended preventive maintenance and any repairs to your BATEC
ELECTRIC HANDBIKE must be done by a company authorised by BATEC
MOBILITY.
Replacing tyres and inner tubes:
Before installing a new inner tube, check the base of the rim and in-side
wall of the tyre to remove any foreign bodies and, if necessary, clean well.
Check the conditions of the rim tape, particularly around the valve hole.
Only strong, properly placed rim tape can provide long-term protection
against damage to the inner tube caused by burrs and sharp spoke heads.
Before inflating the inner tube, check the whole tube to make sure it hasn’t
got stuck between the tyre and the rim. Carefully pull on the valve and
extract it for optimal installation.
CAREFUL!
After installing the new inner tube, check tyre pressure. It is essential to
keep pressure at specified levels and to make sure tyres are in prop-er
conditions in order to ensure your personal safety and keep your
HANDBIKE BATEC ELECTRIC in proper working order.