Page 21 of 28
SQ-Series Operation Manual REV01 1120
Channel B
Audio Source
(DSM-428)
Channel A
1+
1-
2-
2+
Channel B
Channel D
1+
1-
2-
2+
Channel C
1+
1-
2-
2+
CH C
2 Wire Cable
(1+/1-)
1+
1-
2-
2+
Channel A
CH A
2 Wire Cable
(1+/1-)
CH D
2 Wire Cable
(1+/1-)
CH B
2 Wire Cable
(1+/1-)
Parallel Mode
PARALLEL
STEREO
Figure 9.6
Two Inputs in parallel mode. If you need the same signal on two or more outputs you can set the inputs to parallel mode. That
means the input signal will be internal linked to the next input channel.
Maintain proper polarity (+/–) on output and input connectors. Use Class 2 output wiring.
IMPORTANT: Turn off the amplifier and unplug its power cord.
INPUTS:
Connect analog input wiring for all signals you want to connect to the amplifier.
OUTPUTS:
Spkn outputs figure 9.6
To wire the speakers connect two wire Spkn cables (1+/1-) from each speaker to the corresponding
output socket of the amplifier.
SWITCHES:
Select the input sensitivity accordingly your audio source or mixer.
Select the Input Channel you want link into parallel mode. In our sample CHA->CHB and CHC->CHD.
9.) SYSTEM SETUP
9.5) Two Channel Parallel Mode (SQ-1604, SQ-2404, SQ-3204)
Summary of Contents for Pro Audio SQ Series
Page 2: ......