Page 13 of 28
SQ-Series Operation Manual REV01 1120
Sensitivity:
Select the input sensitivity CH-AB and CH-CD.
Input Mode:
Select between Mono (Parallel), Stereo and Bridge Mode.
7.6) SQ-1604, SQ-2404, SQ-3204 Switch Settings
The four channel models offer the following control options by setting up the control switches.
Sensitivity Switches:
Select between three different input sensitivity level. (0,775V/1,0V/1,5V)
The right setting and a correct system gain structure is very important to reach maximum
signal headroom, less noise and avoid clipping at any position of your sound structure.
Please refer to 9.7 Setting System Gain Structure.
Input Mode:
Select between Stereo, Mono (Parallel) or Bridge Mode.
If the switch is set to mono (parallel) mode the signal of the input socket CHA will be
internal linked to the Input signal for CHB. The signal of CHC will be linked to CHD.
In bridge mode CHA and CHB and (or) CHC and CHD become to one bridge mode channel
with much more Power.
Please refer to the details 9.8 Bridge Mode Function.
The lowest speaker impedance of each output in bridge mode is 4 Ohm!
7.) CONTROLS AND INDICATORS
Figure 7.2
Summary of Contents for Pro Audio SQ Series
Page 2: ......