![background image](http://html1.mh-extra.com/html/4-acoustic/pro-audio-sq-series/pro-audio-sq-series_operation-manual_3067631017.webp)
Page 17 of 28
SQ-Series Operation Manual REV01 1120
Channel A
Channel B
Audio Source
Channel A
Channel B
Stereo Mode
Figure 9.1
9.1) Typically Stereo System Setup
Typical input and output wiring for stereo system setup. Maintain proper polarity (+/–) on output and input connectors. Use
Class 2 output wiring.
IMPORTANT: Turn off the amplifier and unplug its power cord.
INPUTS:
Connect analog input wiring for both channels.
OUTPUTS:
Binding posts outputs figure 9.1
Connect Channel 1 loudspeaker’s positive (+) lead to Channel 1 positive
(red) terminal of amp; repeat for negative (–). Repeat Channel 2 wiring as for Channel 1.
Spkn outputs figure 9.2
To wire stereo speakers to the Spkn connectors plug the Channel 1 speaker into the Channel 1 Spkn
connector, and plug the Channel 2 speaker into the Channel 2 Spkn
SWITCHES:
Select the input sensitivity accordingly your audio source or mixer.
Select the Input Mode to Stereo.
Channel A
Channel B
Audio Source
Stereo Mode
1+
1-
2-
2+
Channel B
Channel A
1+
1-
2-
2+
2 Wire Cable
(1+/1-)
2 Wire Cable
(1+/1-)
Figure 9.2
9.) SYSTEM SETUP
Summary of Contents for Pro Audio SQ Series
Page 2: ......