VISIX SOLUTIONS | VX-2S-OP-30X QUICK START GUIDE | p.4
NOTE:
n
For cement walls, you need to use the expansion screws to fasten the bracket. The mounting hole of the
expansion pipe on the wall should align with the mounting hole on the bracket.
n
For wooden walls, you can just use the self-tapping screw to fasten the bracket.
n
Make sure that the wall is strong enough to withstand more than eight times the weight of the speed dome and
its accessories.
n
The bracket in Figure 2-9 is the recommended bracket for this series of speed dome, and a pendent adapter is
required if any other bracket is selected. The dimension of pendant adapter is G1
1
2 .
Steps:
1.
Loosen the two lock screws on both sides of the speed dome.
NOTE:
Only loosen the screws. Do not remove the lock screws from the speed dome.
Back Box
Bubble
Protective Foam
Lens Cover
Figure 2-4
Remove the Bubble
2.
Pull the bubble to separate it from the back box, and remove the protective accessories.
Protective Sticker
Figure 2-5
Remove the Protective Accessories for Separated Speed Dome
Protective Sticker
Figure 2-6
Remove the Protective Accessories for Integrated Speed Some
3.
If your speed dome supports PoE (Power over Ethernet), you can switch the PoE+ and Hi-PoE function for the
speed dome. If PoE function is not supported, skip this step.