USER MANUAL|
VX-2S-CPIR-W
10385 Westmoor Drive, Suite 210, Westminster, CO 80021 | www.3xlogic.com | (877) 3XLOGIC
48
CONFIGURING EXTERNAL DEVICES
External Device
settings apply to supported external devices, including a housing wiper or LED
lighting. Settings for these devices can be configured here. Supported external devices vary according
to different camera models.
Steps:
1.
Enter the External Device configuration interface:
Configuration > System > System Settings >
External Device
Figure 8-9
External Device Settings
2.
Check the Enable Supplement Light checkbox to enable the LED Light.
3.
Move the slider to adjust the low beam brightness and high beam brightness.
4.
Select the mode for LED light. Timing and Auto are selectable.
Timing:
The LED will be turned according to the schedule. You should set the Start Time and
End Time.
Figure 8-10
Set Schedule
Auto:
The LED will be turned on according to the environment illumination.
5.
Click Save to save the settings.
CONFIGURING VCA RESOURCE
The
VCA Resource
interface offers you options to enable certain VCA functions according to actual
need when several VCA functions are available. It helps allocate more resources to the required
functions.
Figure 8-11
VCA Resource Configuration