USER MANUAL|
VX-2S-CPIR-W
10385 Westmoor Drive, Suite 210, Westminster, CO 80021 | www.3xlogic.com | (877) 3XLOGIC
101
c.
Select the mounting type. NFS and SMB/CIFS are selectable. You can set a user name and password
to strengthen security if SMB/CIFS is selected (highly recommended).
14.
NOTE:
Please refer to the NAS User Manual for creating the file path.
For your privacy and to better protect your system against security risks, we strongly
recommend the use of strong passwords for all functions and network devices. The password
should be something of your own choosing (using a minimum of 8 characters, including at
least three of the following categories: upper case letters, lower case letters, numbers and
special characters) in order to increase the security of your product.
Proper configuration of all passwords and other security settings is the responsibility of the
installer and/or end-user.
d.
Click Save to add the network drive.
2.
Initialize the added network drive.
a.
Enter the HDD Settings interface:
Configuration > Storage > Storage Management > HDD
Management
. From here, you can view the capacity, free space, status, type and property of the drive.
Figure 13-7
Storage Management Interface
b.
If the status of the drive is Uninitialized, check the corresponding checkbox to select the drive and
click Format to start initializing the disk.
Note:
When the initialization completed, the status of the drive will become Normal.
Figure 13-8
View Disk Status
3.
Define the quota for recorded footage and pictures.
a.
Input the quota percentage for pictures and for recorded footage.
b.
Click Save and refresh the browser page to activate the settings.