USER MANUAL|
VX-2S-CPIR-W
10385 Westmoor Drive, Suite 210, Westminster, CO 80021 | www.3xlogic.com | (877) 3XLOGIC
18
4
Quick Start
4.1
Adding a VX-2S-CPIR-W Camera to VIGIL Utilities
ADDING A VX-2S-CPIR-W CAMERA TO VIGIL CLIENT
Steps:
To interface a VX-2S-CPIR-W Camera with VIGIL Client:
1.
Launch VIGIL Client (
Local Mode
only; VCM mode will only display Servers from a networked VCM
Server) and select
Servers
from the
Servers
top menu. This will launch the Servers window. VISIX V-
Series devices are considered edge recording devices and thus are recognized as their own VIGIL
Server within the VIGIL suite.
2.
Click
Add
. This will deploy the
Add/Edit VIGIL Server
window.
3.
Enable the
Use VIGIL Connect
option. If connecting using traditional network connection criteria is
desired, enter the cameras
IP Address/DNS Name
and confirm TCP/IP port status.
4.
Enter in the VIGIL Connect alias of the desired VX-2S-CPIR-W Multi Sensor Camera (
VIGILTest1
used
in the below example). Skip this step if using traditional network connection criteria (IP/Port).
5.
Click
Test VIGIL Connect
to confirm the camera can be communicated with through the Connect
system using the provided alias. Skip this step if using traditional network connection criteria
(IP/Port).
Figure 4-1
Adding V-Series Camera to VIGIL Client