Hardware and Installation Manual
|
VISIX V-Series All-in-One Cameras
–
Gen I
12000 Pecos Street, Suite 290, Westminster, CO 80234 | www.3xlogic.com | (877) 3XLOGIC
11
2.3
Part Names
1).
Sunshield:
Position the sunshield to prevent direct sunshine.
2).
Video-Out Cable Socket:
Socket for the video output cable included in the package (CVBS: 1.0Vp-p /
75Ω BNC)
3).
PAL/NTSC button:
Pressing the PAL/NTSC button each time changes the mode as follows: No video
output -> PAL-> NTSC
4).
Reset button:
Use the button to restart the device or to reset it to Factory Default. Refer
to
the
3xLOGIC VISIX All-in-One Camera User Manual for more details on restarting/resetting to factory
default.
5).
Focus Puller:
Use the puller to manually determine correct focus of the camera. Refer to Adjusting
Zoom and Focus for more details.
6).
Zoom Puller:
Use the puller to manually determine appropriate field of view of the camera. Refer to
Adjusting Zoom and Focus for more details.
7).
microSD memory card slot:
The camera supports up to 32GB. A card with Class 4 and higher is
recommended for HD recordings.
8).
Terminal Connector:
Connector for cable connection of digital input/output. Refer to Section 2.5:
Connections for more details.
9).
Power Adaptor Connector:
Use DC12V for the power supply.
10).
LAN connector:
RJ45 LAN connector for 10/100 Base-T Ethernet (PoE supported)
❾
* Models herein and their appearance are subject to change without any prior notice.
❸
❹
❿
❽
❷
❼
❺
❶
❻
