Shell Object Commands
www.3ware.com
30
show ver
This command will show the CLI and API version.
Example:
//localhost> show ver
CLI Version = 2.00.03.0xx
API Version = 2.01.00.xx
In the above example, “xx” stands for the actual version. See the Release
Notes for details.
show verify
This command displays all verify schedules for the 9000 series controllers in
the system. The output shown will be either the advanced or the basic verify
schedule, depending upon which is enabled for each controller. Basic verify is
only supported on the 9650SE and 9690SA controllers running 9.5.1 or later.
Example:
This example shows two controllers, one with an advanced verify schedule
and one with a basic verify schedule.
//localhost> show verify
Verify Schedule for Controller /c2
========================================================
Slot
Day
Hour
Duration
AdvVerify
--------------------------------------------------------
1
Sun
12:00am
24 hr(s)
on
2
Mon
12:00am
24 hr(s)
on
3
Wed
4:00pm
24 hr(s)
on
4
Wed
12:00am
24 hr(s)
on
5
Thu
12:00am
24 hr(s)
on
6
Fri
12:00am
24 hr(s)
on
7
Sat
12:00am
24 hr(s)
on
/c3 basic verify weekly preferred start: Saturday, 12:00AM
For additional information about verify schedules, see “/cx add
verify=ddd:hh:duration” on page 63, “/cx set verify=basic [pref=ddd:hh]” on
page 68, and see the discussion of background tasks and schedules in
3ware
SAS/SATA RAID Software User Guide, Version 9.5.1
.
