Chapter 2. CLI Syntax Reference
123
3ware SAS/SATA RAID Controller CLI Guide, Version 9.5.1
/cx set autocarve=on|off (9000 series)
/cx set carvesize=[1024..32768] (9KSX/SE/SA only)
/cx set rebuild=enable|disable|<1..5>
(enable|disable for 9000 series)
/cx set verify=enable|disable|<1..5>
(enable|disable for 9000 series)
/cx set selftest=enable|disable [task=UDMA|SMART](9000
series)
/cx set autorebuild=on|off (9KSX/SE/SA only)
/cx set autodetect=on|off disk=<p:-p>|all (9000 series)
/cx set dpmstat=on|off (9000 series)
/cx update fw=
filename_with_path
[force] (9000 series)
/cx flush
/cx commit (Windows only) (Also known as shutdown)
/cx start mediascan (7000/8000 only)
/cx stop mediascan (7000/8000 only)
/cx rescan [noscan] NOTE: Does not import non-JBOD on 7/8000
models.
//localhost>
Help with attributes
As you work with specific objects or commands, you can also use
?
to get
help.
For example: If you enter the command
/c0
show
and then need help on what
specific attribute syntax is possible, you can use
?
to get help as following:
//localhost> /c0 show ?
/cx show
/cx show
attribute
[
attribute ...
] where attribute is:
achip|allunitstatus|autocarve(9000 series)|
autorebuild(9550SX only)|bios|carvesize(9000series)|
driver|drivestatus|exportjbod|firmware|memory|model|
monitor|numdrives|numports|numunits|ctlbus(9000 series
SX/SE/SA only)|serial|ondegrade (9500S only)|pcb|
pchip|spinup|stagger|unitstatus|
/cx show all where all means attributes and configurations.
/cx show diag
/cx show alarms [reverse]
/cx show rebuild (9000 only)
/cx show verify (9000 only)
/cx show selftest (9000 only)
//localhost>
