19
1 x Press button
P2 / Set Up
PROGRAMMING
Jog mode:
Note:
In jog mode, press and hold the up or down button
for 2 seconds to activate continuous up or down travel.
1 x Press
Down-button
1 x Press
Up-button
Beep from motor
+ down and up
1 x Press button
P2 / Set Up
+
Beep from motor
+ down and up
+
+
The motor confirms
the programming
with a long beep
and down and up
OFF
The motor confirms
the programming
with 3 x beep
and 3 x down and up
ON
+
Delete end
points:
1 x Press
Down-button
Beep from motor
+ down and up
1 x Press button
P2 / Set Up
+
Beep from motor
+ down and up
+
+
The motor confirms
the programming
with 3 x beep
and down and up
OK
Activate / deactivate initialization of the
pairing process by switching on the power
supply:
ON
: Initialization of the pairing process for handheld transmitters via
P1 button or switching on the power supply.
OFF
: Initialization of pairing process for handheld transmitter only via
P1 button
1 x Press
Up-button
1 x Press
Up-button
Beep from motor
+ down and up
1 x Press button
P2 / Set Up
+
Beep from motor
+ down and up
+
+
The motor confirms
the programming
with a long beep
and down and up
OFF
The motor confirms
the programming
with 3 x beep
and 3 x down and up
ON
+
Note:
The intermediate position is removed by deleting
the end points and must be reset if necessary.
3T-MOTORS Radio tubular motors
| Programming