3Svision N6074, User Manual

Page: 97 / 138

Bullet Network Camera
- 97 -
Privacy Mask
To ensure the confidential, the Bullet Network Camera provides the Privacy Mask for you
to mask the image in the masked zone.
The following diagram illustrates how to set the Privacy Mask.
1. Click the
Area
to set the mask zone for you to open the setting frame and the setting
frame will show on your screen.
(There are 3 frames available for setting: Area 1, Area 2 and Area 3.)
2. Adjust the frame size by move and drag the edge of the frame on the arrow of your
mouse, after adjusted click the left button of your mouse.
3. Selects the color for Privacy Mask by click the
Color block
in order to show the palette,
move the arrow point and click on the color what you like.
4. After the setting is completed, click Save to apply it and the screen will refresh within a
few second automatically.

Color:
Click the black color to select the color from color-cord table, or input the color-cord to
change the color.

Area:
There are 3 frames available for setting: Area 1, Area 2 and Area 3.
Click
Area
to open the detectable area then click the signal checkbox to enable the
function.