Bullet Network Camera
- 91 -
Alarm Input Setting
Set the alarm input type between N.O.(Normal Open) and N.G. (Normal Ground).
The N.G. means N.C.
Trigger Alarm output:
Click
Trigger
to start the alarm.
Click
Clear
to stop the alarm.
(Please make sure before you click
Clear
for close the alarm testing when the trigger
testing is done).
Trigger mail
After you enter the email address and subject in the field, click the
Set
to test the mail
sending completely.
Trigger FTP
Click the
Set
to upload AVI files to FTP server to test completely.
HTTP Server
After you enter the message in the
Message
field, click the
Set
to upload the message
to HTTP server to test completely.
You can make custom parameters settings completely through
Application Setting > Event > Event Server
.
TCP Server
After you enter the message in the
Message
field, click the
Set
to upload the message
to TCP server to test completely.
Trigger SAMBA
After you enter the Path in the field and click the
Set
to share the folder from your PC.
Summary of Contents for N6074
