Step 4: Complete the process
A message will tell you once the calibration is
completed.
Step 5: Remove the calibration tip
While being guided by the wizard, remove the
calibration tip and put on the protection tip when
finished.
Note!
Make sure the calibration tip is removed from the scanner after calibration as
the tip otherwise may become very warm.
6.2 Cleaning, Disinfection and Sterilization
Please refer to the TRIOS Safety and Setup Guide for cleaning, disinfection and sterilization instructions.
Note!
TRIOS model TRIOS11A can be cleaned, disinfected, and sterilized similar to
model T12A.
Note!
The scanner tips for TRIOS11A can be handled similar to the scanner tips for
T12A and T12P.
76
