3.3.5 Analyze Scan
The
Analyze
page provides four main instruments for inspecting and validating
the impression scans.
1. Press the
Analyze
button to start once you are satisfied with your
impression.
2. Use the provided tools to apply additional validation options.
Setting insertion direction for the restoration
By optimizing the insertion direction you minimize undercuts. You can set the insertion direction in two
ways:
1. Use the
Auto detect
button. The system automatically calculates and sets the insertion direction.
OR
2. Press the
Use view
button. The program detects the insertion direction based on your view of the
scan.
The undercut area is automatically measured and its value displayed on the screen.
Press
Done
when finished.
31
