4
ENGLISH
WARNING
Use of the UNIT adjacent to or stacked with other equip-
ment should be avoided because it could result in improper
operation . If such use is necessary, the UNIT and the other
equipment should be observed to ensure normal operation
in the used configuration .
WARNING
The product needs special precautions regarding electro-
magnetic compatibility (EMC) and needs to be installed and
put into service according to the EMC information provided
in the TRIOS Technical Data .
IMPORTANT NOTICE
The system is to be used in a Professional Healthcare
Environment .
4.2 Intended Use
The 3Shape TRIOS 4 IOS system is intended to obtain 3D digital images
of the topographical characteristics of teeth, including bite, gingivae and
palate directly from the patient’s mouth or models of the teeth .
CAUTION
Unintended use of the TRIOS IOS system can result in phys-
ical injury to patients, operators and damage the system .
4.3 Users of TRIOS
The 3Shape TRIOS intraoral scanner system is to be operated by legally quali-
fied healthcare professionals in dental clinics . Using the TRIOS IOS system for
any purpose other than the intended use described above may damage the
TRIOS IOS system and harm operators and patients . Proper use of the TRIOS
IOS system includes following the operation and maintenance instructions,
and observing warnings and caution descriptions in this user guide .
WARNING
Carefully follow the instructions in this guide
If the instructions for operating the TRIOS IOS system
as described in this guide are NOT observed, the intended
protection and safety of the user and patient may be impaired .
4.4 Contra-indications
None
4.5 Patient Target Group
No restrictions in patient population
4.6 System Description
The system is available in these variants:
Regional variation can occur regarding the contents of the systems .
S3P-2
Pen grip scanner, supplied with a pod (holder),
3 scanner batteries, and a scanner battery charger
S3P-8
Pen grip scanner, supplied with a pod (holder)
that is connected to an external PC via an Ethernet cable,
and a TRIOS 4 cord
S3A-10
Pen grip scanner, supplied with a MOVE® cart with built-in PC,
and a TRIOS 4 cord
S3A-14
Pen grip scanner, supplied with a MOVE cart with built-in
PC, 3 scanner batteries, and a scanner battery charger
S3A-18
Pen grip scanner, supplied with a MOVE®+ cart with
built-in PC, and a TRIOS 4 cord
S3A-22
Pen grip scanner, supplied with a MOVE+ cart with built-in
PC, 3 scanner batteries, and a scanner battery charger
You can find the figures in the final section of this guide .
All system variants comprise:
•
Handheld TRIOS intraoral scanner, S3-2
(S1 and S2):
Wired and wireless handheld dental intraoral scanner
for scanning the surface of the patient’s teeth .
•
TRIOS 4 SmartTip, TST-01
(S3): Re-usable scanner tip attached to the
handheld TRIOS Scanner . The scanner tip must be cleaned and sterilized
prior to first use on a patient and after each use on a patient .
The scanner tip as well as the protection tip (S4) can be attached
by the following procedure:
1 . Place the tip over the front tube with the mirror facing upwards
or downwards .
2 . Twist the tip until a firm mechanical click is felt .
3 . The tip is removed doing the opposite procedure:
4 . Twist the tip away from the center of the scanner .
5 . Pull the tip away from the scanner body (S4) .
The label on the protection tip indicates the attaching/removing movement
(S4) . When the tip is detached, the scanner’s optical window (S3) is visible .
The TRIOS 4 tip contains a mirror and electronics . A set of scanner tips
is delivered with the scanner . The scanner tip is the only applied part .
•
Protection Tip, TST-03
(S4): Protects the optical window of the scanner
from damage and dirt when the scanner is not in use .
•
Color Calibration Kit, TST-02
(S5): Used for calibrating TRIOS scanners .
The kit consists of the color calibration target (S6), the sleeve (S7), and
the color calibration adaptor (S8) .
•
TRIOS software:
Scan application/user interface for the scanner .
•
Power (mains) cable and plug:
The system is delivered with a cable
appropriate for your location . In the USA and Canada, this is a Nema 5-15P
Hospital Grade mains power cord with plug for the MOVE/MOVE+ cart .
For the charger a C7 connector is used .
•
A set of batteries for the scanner, TB-02 or TB-03
(S9)
•
A battery charger, C3BP, with wall mount
(S10)
For systems S3A-10, S3P-8:
•
TRIOS 4 cord, TSC-01
(S11): The wired systems are delivered with a cord,
which is inserted in the scanner by pressing the button as shown in (S2) .
The blue light indicates a connection to either the Pod or the MOVE+ cart .
The green light indicates a connection to the scanner .
System S3A furthermore comprises:
•
MOVE cart C 4.0 and MOVE+ cart C 4.1 (Figure 2),
for intraoral digital
impression system .
Following description applies to both MOVE and MOVE+ cart:
• Has an adjustable monitor (S12, S13, S14) .
• Has a
scanner mount (S15)
for holding the scanner while not in use .
• Has
wheels
for mobility (and brakes (S16) if mobility is not desired) .
•
Computer Unit
. Attached to the MOVE/MOVE+ cart for processing,
storage and running the TRIOS software .
