Saving the tank calibration table in the sensor’s memory
If you have a tank calibration ready and you want to save it in the sensor’s memory so that the
sensor could output readings in liters or gallons, you need to open the
Recalculate in liters
menu by
pressing the
cog icon
(
Fig. 80
) on the main screen of the sensor or on the
Recalculate in liters
button in the Additional Features menu (
Fig. 81
,
1
).
Fig. 80
Recalculate in liters
Fig. 81
Additional Features. Recalculate in liters
Then you can activate the conversion of level readings into liters or gallons and either input
the data manually creating new rows or by importing the tank calibration table.
If the file of the table is inactive - move it into another folder and try again
Activate the Recalculate in liters tumbler (
Fig. 82
,
1
).
54
Summary of Contents for TD-BLE
