19
20
SL
-R60S F
all Arres
ter
Inspection record
Date of annual inspection:
Model/Standard:
Inspected by:
Serial number:
Date of initial use:
Inspection requirements
Remarks
Yes
No
1. Check and ensure no damage, oil, dust, or dirt on the surface of the fall
arrester.
2. Check and ensure no deformation or fracture of the carabiner. Check
and ensure the gate lock of carabiner can be automatically closed.
3. Check and ensure all rollers rotate flexibly.
4. Check and ensure no deformation and damage on the fall arrester, and
that the locking lever and swing lever rotate flexibly without clamping
stagnation when the carabiner is lifted, and return to original position
automatically after the carabiner is released.
5. Check and ensure that the push button and rotary knob return to their
original positions after they are released.
6. Check and ensure the shock absorber is intact without being extended.
7. Check and ensure the joint gap is less than 2mm.
8. Check and ensure that when the fall arrester moves along the guide rail,
no abnormal noise is heard.
9. Check and ensure all connections by riveting are secure without obvious
wear, deformation or dislocation of torque marks.
Annual Inspection
Appendix
Inspection requirements
Remarks
Yes
No
10.Ensure no deformation, cracks or looseness on the ladder and guide
rail.
11. Ensure that the end stops on the rail type fall protection system are
mounted properly.
12. Ensure that all mounting brackets and fasteners are well secured.
13. Ensure completeness and legibility of the markings on the fall arrester.
This table can only be filled in by competent person, and can be duplicated for further use.
