24
User’s Manual
3.2.7. CANBUS
The Main Interface Diagram of CANBUS
①
Real-time display of received data values
②
Calculate the data frame sent and the total time of the data frame
③
Baud rate selection: serial port baud rate on the left, CAN baud rate on the right
④
Sending frame number selection mode: only one frame is sent on the left, and the
set number of data frames is sent on the right
⑤
Types of data frames sent: mainly extended frames and standard frames
⑥
The format of sending data frame: data and Remote
⑦
ID filter settings
⑧
OTA upgrade mode
⑨
Choose to turn on or turn off the serial port
⑩
Clear real-time display
⑪
The left is the setting of the total number of frames sent (users can set it by
themselves), and the right is to select whether the number of frames sent each time is
superimposed or not
⑫
Delay between sending times, unit: ms
⑬
The form setting of sending CAN data frame
⑭
Delay between sending data frame interval, unit: ms
⑮
The left is the mode to stop sending data frames, and the right is the mode to send
data frames
