8
b. Short press button to sleep.
c. Sleep by ACC, see the details in Chapter “3.3 Using ACC”
d. Short press to wake
e. Wake by ACC, see the details in Chapter “3.3 Using ACC”
f. The average of power consumption in sleep status: 1W
2.2 Changing the Battery
The tablet battery is installed in a removable way, which greatly facilitates the
user's use of disassembly and installation.
（
Note: Please shut down before removing the battery.
）
Icon introduction:
1
：
The switch is on the left, lock the machine state, lock the battery
2
：
The switch is on the right to unlock the machine status, and the battery can
be removed
3
：
In the direction of the arrow, push the indicated skateboard up
The specific operation methods of installation and removal are as follows:
①
To lock the battery status switch, turn it to the left. When you want to remove the
battery, you need to turn the switch to the right.
②
Slide the control battery back plate up along the groove. After completion, the
slide plate is on the top, as shown in the figure below.
