CH.9 ACCESSORIES
9.1 FILTER
In order to prevent foreign bodies from being sucked by the pump, it is recommended that it will
be equipped with a filter to be applied to the suction inlet (see figure 9.1 ).
The filter must be periodically cleaned. Cleaning is carried out as follows:
- unscrew the bolts (
a) and remove the cover (b);
- unscrew the cap (
c) located on the bottom;
- remove the bulkhead filter and proceed with the cleaning process.
- re-assemble everything while ensuring that the gasket of the cover is housed in the special slot
in order to prevent the intake of air;
- firmly tighten the bolts (
a)
9.2 HEAT COVERS
If very viscous liquids, with viscosity that increases with a decrease in room temperature, are to
be pumped, it is essentiall to equip the pump with a heating cover (see fig 9.2) and to insulate
eventually the pipes. Said cover can be heated by circulating hot water, steam or diathermic oil.
®
®
21
Summary of Contents for Pompe 3P M Series
Page 1: ... INSTRUCTION MAINTENANCE MANUAL M Series ...
Page 2: ... 3 w M T t o L 3 V M ...
Page 33: ...E ...