3onedata NP30XT series, User Manual

Page: 18 / 20

CLI user manual
Page15
4.3 Overtime time configuration
Please check the table 4.3.1
Overtime time is defined as: after enter into CLI configuration mode, overtime time with none operation,
after over time, will go to user mode automatic, re-identify user name and password
Table 4.3.1
Operating Command Description
The configuration of
overtime time
Set <time_out>
<time_out> : Overtime time, value[0-60], unit: minute, default
time: 5 minutes, if 0 minute, the function is closed
Example: Configuration System overtime time: 10 minutes, enter the bold type command as follows and enter
return key:
Switch (manage)#
set 10
[OK]
4.4 IP address, default gateway
Please check the table 4.4.1
Table 4.4.1
Operating Command Description
Configuration of IP
address
Ip <ip_address> <mask>
<ip_address>
：
ip address
<mask>
：
subnet mask
Default gateway Gateway <gateway>
<gateway>
：
gateway address
Example: Configure IP address:192.168.1.254, subnet mask; 255.255.255.0, default gateway: 192.168.1.1,
enter the bold type command as follows and enter return key:
Switch(Manage)#
ip 192.168.1.254 255.255.255.0
[OK]
Switch(Manage)#
gateway 192.168.1.1
[OK]
4.5 User name, password configuration
Please check the table 4.5.1
Table 4.5.1
Operating Command Description
User name Hostname <hostname>
<hostname>
：
only character and digit in legal
Password Password <password> <password> <password>
：
only character and digit in legal
4.6 Factory default
Please check the table 4.6.1
Table 4.6.1
Operating Command Description
Factory default Restore Carry out under the view of device information
Example:
If need factory default, enter the bold type command as follows and enter return key:
Switch
（
manage
）
# restore