manualshive.com logo in svg

3onedata IES716-2GS, User Manual, Page: 46 / 54

Share
Download
3onedata IES716-2GS User Manual Download Page 46

                                                                                                                      User manual  

 

 

Page 46 

Network type                   Address range                                  Available IP network range 
   A        

 

  0.0.0.0

～

126.255.255.255                    

   1.0.0.0

～

126.0.0.0 

   B        

  128.0.0.0

～

191.255.255.255                 

   128.0.0.0

～

191.254.0.0 

   C        

  192.0.0.0

～

223.255.255.255                     

   192.0.0.0

～

223.255.254.0 

   D        

  224.0.0.0

～

239.255.255.255                                      Non 

   E       

  240.0.0.0

～

246.255.255.255                                      Non 

Others                           255.255.255.255                                         255.255.255.255  

 

A, B, C class address is unicast address; D class address is multicast address; E class address is 

reserved to prepare for the future for special purposes.  

IP address using dotted decimal. 

Each IP address is represented as four decimal integers separated by 

decimal points, each integer corresponds to a byte, such as, 10.110.50.101.  

 

Subnet Mask   

Mask is corresponding 32 bits number of IP address. Some are 1, the others are 0. These 1 and 0 can 

be combined arbitrary in principle, but the first continuous bits are 1 when designing subnet mask. IP 

address can be divided into 2 parts by subnet mask: subnet address and host address. 1 in IP address 

and subnet corresponds to subnet address, other bits are host address. A type of address 

corresponding mask is 255.0.0.0; mask of B type address is 255.255.0.0; mask of C type address is 

255.255.255.0. 

Default Gateway   

Default gateway in the host PC is generally called default route. Default route refer to a kind of router 

that destination address of IP data packet will choose when it don’t find other existing route. All data 

packets of destination address which don’t exist in the list of router will choose default route. 

 

DNS Address 

DNS (Domain Name Server) is for us to analyze domain to IP address of the Internet. If our 

equipment needs to access a host, you need to use this server to resolve an IP address. 

 

Device reboot 

Can reboot the switch remote. Knock [Basic settings/Network&reboot] menu, Enter into reboot interface, 
Figure as 6.11.1. 

Knock<Reboot> button, after confirmation, device will be reboot. After 20 seconds, know menu bar 

and back to WEB manged login interface. 

 

 

Summary of Contents for IES716-2GS























































Reviews:

No comments