3onedata IES6210 Series User Manual Download Page 76

Page: 76 / 96

Managed Industrial Ethernet Switch User Manual

3onedata proprietary and confidential 69

Main elements configuration description of received frames statistics interface:

Interface Element Description

InGoodOctets

Received valid data bytes (including FCS).

InbadOctets

Received invalid data bytes (including FCS).

InUnicasts

Valid unicast data frames number.

InBroadcasts

Valid broadcast data frames number.

InMulticasts

Valid multicast data frames number.

Notes:

Broadcast data frames are not included.

InPause

Valid flow control pause frames number.

InUndersize

Valid data frames number whose length is less than 64 bytes.

InFragments

Fragmented frames number.

Notes

：

FCS verification is invalid when the data frame length is less than

64 bytes.

InOversize

Received valid oversize data frames number.

Notes:

Oversize frames refer to those data frames whose length is more

than 1518 or 1522 bytes.

Summary of Contents for IES6210 Series

































































































Search results

Summary of Contents for IES6210 Series

Reviews:

Brands by name

Popular brands

3onedata IES6210 Series, User Manual

Search results

Summary of Contents for IES6210 Series

Reviews:

Brands by name

Popular brands