3onedata IES6210 Series User Manual Download Page 19

Page: 19 / 96

Managed Industrial Ethernet Switch User Manual

3onedata proprietary and confidential 12

Operation Path

Open in order: "Main Menu > Port Config > PoE Config”.

Interface Description

PoE configuration interface as follows:

The main element configuration description of PoE configuration interface:

Interface Element Description

POE total power

The total power of all PoE ports that supply power.

Port

The PoE port number of the device.

State

The power state of PoE port.

Class

The PoE power class.

Electricity (mA)

The current size of PoE port power.

Voltage (V)

The voltage size of PoE port power.

Power (W)

The power size of PoE port power.

Max power (W)

The maximum output power limitation of configuring PoE port.

Enabled

Check the box to enable port PoE power function.

Priority

The priority configuration of PoE port power supply. Port
power distribution priority with the constraint of gross power.

Summary of Contents for IES6210 Series

































































































Search results

Summary of Contents for IES6210 Series

Reviews:

Brands by name

Popular brands

3onedata IES6210 Series, User Manual

Search results

Summary of Contents for IES6210 Series

Reviews:

Brands by name

Popular brands