![background image](http://html1.mh-extra.com/html/3onedata/iap2600-series/iap2600-series_user-manual_444500016.webp)
Industrial Wireless Dual-band AP User Manual
3onedata proprietary and confidential 9
Copyright © 3onedata Co., Ltd.
Interface Element
Description
WAN, it can be accomplished via the device route function.
AP
Under the AP mode, the device can be used as a wireless
access point, the equivalent of the wireless switch.
Bridge
Under the bridge mode, the device will convert received
wireless signal to cable signal and wireless signal.
Client
Under the client mode, the device will convert received
wireless signal to cable signal.
3.1 Route
Under the route mode, the device WAN port can be connected to the WAN via PPPoE
dial-up, static IP and dynamic acquisition. Under this mode, LAN port and wireless
signal are in the same VLAN, the LAN port defaults to enable DHCP server function.
PPPoE (PPP over Ethernet) transmits PPP (Point to Point Protocol) on the Ethernet;
it's a protocol that provides access service for hosts on the Ethernet via a remote
access device.
The quick configuration of route mode mainly includes five configuration links:
WAN settings
LAN settings
2.4G WiFi
5G WiFi
Finish
Following is the explanation of the five configuration links.
3.1.1 WAN Settings
Function Description
On the "WAN Settings" page of route mode, WAN port can be connected to WAN via
three methods:
PPPoE;
Static IP;