Industrial Wireless Dual-band AP User Manual
3onedata proprietary and confidential 2
Copyright © 3onedata Co., Ltd.
Please confirm the computer has installed and enabled Ethernet network card.
Before conducting remote configuration, please confirm the route between
computer and device is reachable.
Before conducting local configuration, please confirm the IP address of computer
is in the same subnet to the device;
Notes:
While configuring the device for the first time, if it's the local configuration mode, first
confirm the network segment of current PC is 1.
E.g.: It's assumed that the IP address of current PC is 192.168.5.60, modify the
network segment of IP address from "5" to "1".
Operation Steps
Modification steps as follows:
Open "Control Panel > Network Connection > Local Connection > Property > Internet
Step 1
Protocol Version 4 (TCP/IPv4) > Property".
Change the selected "5" in red frame below to "1".
Step 2
Click "OK", modification is successful.
Step 3
End.
Step 4