remove the power line, please note the operation order
above.
【
Power Supply Connection
】
External 5VDC power supply
Model I provides external 5VDC power supply, DC
round head.
Built-in 220VAC power supply
Model II provides built-in 220VAC power supply,
and AC outlet with switch.
Power supply range: 85~265VAC.
Built-in 48VDC power supply
Model III provides 3-pin 5.08mm pitch
terminal blocks and built-in 48VDC power
supply.
【
Checking LED Indicator
】
The device provides LED indicators to monitor its operating
status, which has simplified the overall troubleshooting
process. The function of each LED is described in the table as
below:
LED
Status
Description
PWR
ON
PWR is connected and running
normally
OFF
PWR is disconnected and running
abnormally
Link/Act
（
TX
）
ON
Copper port has established valid
connection
Blinking
Copper port is in an active
network status
OFF
Copper port hasn
’
t established
valid connection
Link/Act
(FX)
ON
Fiber port has established valid
connection
Blinking
Fiber port is in an active network
status
OFF
Fiber port hasn
’
t established valid
connection
100(TX)
ON
Copper port rate is 100Mbps
OFF
Copper port rate is 10Mbps or it is
not connected
100(FX)
ON
Fiber port rate is 100Mbps
OFF
Fiber port is not connected
FDX
ON
Copper port is in full duplex mode
OFF
Copper port is in half duplex mode
【
Specification
】
Panel
100M copper port
10Base-T/100Base-TX
self-adaption
100M fiber port
100Base-FX fiber port
Indicator
Power supply indicator, fiber
port
rate
status
indicator,
copper
port
rate
status
indicator, fiber port connection
status indicator, copper port
connection
status
indicator,
copper port duplex indicator
Power supply
Model I
External 5VDC power supply,
DC round head
Model II
Built-in 220VAC (85~265VAC)
power supply, AC outlet with
switch
Model III
Built-in 48VDC power supply,
3-pin 5.08mm pitch terminal
blocks
Operating
environment
Operating temperature
-10~60
℃
Storage temperature
-20~70
℃
Operating humidity
5%~95% (no condensation)
Protection grade
IP30
