48
Partial functional configuration instructions and examples
Custom prefix/suffix example
Set the prefix/suffix by scanning the code, each prefix or suffix maximum is 10 characters. (To ensure that the
custom prefix/suffix can be output, please scan the barcode “Turn on the custom prefix/suffix output”)
Example 1.1
Add a custom prefix XYZ to all types of barcodes
Chec
k the
appendix
barcode type ID list, a
ll barcodes’ HEX values are 99.
Check the
appendix
character ASCII list,
XYZ’s
HEX value is 58,59,5A. Scan the barcode “
Custom prefix
”, scanner will make two sounds of “
Beep..beep
”, next scan
data and editing bar code “
9, 9, 5, 9, 5, A
” in the appendix, then scan barcode “
save
”. It completes the setting process.
If you need to modify the scanned barcode before saving it, scan barcode “
Cancel the previous reading
” or “Cancel
the
string of data you read earlier”
, it will start to reset again. If you need to abandon this configuration in the middle, scan
barcode “Cancel
current settings
” .
Example 1.2: Add a custom prefix R to QR codes
Check the appendix barcode type ID list, QR code’s HEX values is 51. Check the appendix character ASCII list,
R’s HEX value is 52. Scan the barcode “
Custom prefix
”, next scan data and editing bar code “5
,
1
,
5
,
2”
in the
appendix, then scan barcode
“save
”. It completes the setting process.
Bar code length limit setting example
When setting the minimum length limit of barcode, you must ensure that the minimum length set is not longer than
the current maximum length, otherwise scanner will prompt with an error. Similarly, when setting the maximum
length limit of barcode, it is necessary to ensure that the maximum length set is not less than the current minimum
length.
Example 2.1
:
Set the barcode of Code 128 length to 4-12 bits
Scan the barcode “
Code 128 Minimum length limit
”, next scan the barcode “
4
” in the data and editing of appendix
,
then
scan the barcode “Save”.
Scan the barcode “Code
128 Maximum length limit
”, next scan the barcode “
1,2
” in the data and editing of
appendix, then scan the barcode “Save”.
Example 2.2
: Set the barcode Interleaved 2 of 5 length to 14 bits
Setting the length of Interleaved 2 of 5 to 14 bits can be set directly by scanning quick setting barcode “
ITF25 14
bits length
”, or by setting Bar code maximum minimum length.
Scan the barcode “
Interleaved 2 of 5 Minimum length limit
”, then scan the barcode “
1,4
” in the data and editing
of appendix, then scan
the barcode
“Save
”.
Summary of Contents for SC550
