3M™ Wireless Communication System Model XT-1
Store Manager Operating Instructions
November 2011 -
Revision 1.8
Page 43 of 65
Appendix: Greeter Module
The following menu choices are available.
1.
Message Activation
2.
Record Messages
3.
Choose Headsets Messages Playback To
4.
Message Daypart Definitions
5.
Greeter Message Properties
6.
Alert & Reminder Message Properties
7.
Alert Message External Trigger Input
8.
Message Names
Message Activation
Perform the following procedure to schedule and activate GREETER and REMINDER messages.
Note:
This step should be done after Daypart Definitions have been configured and Messages Recorded.
1. Enter the greeter configuration menu.
2. Select
1 Message Activation
.
Act.<NO > :MESSAGE ACTIVATION:
Msg.<001><MON> [Breakfast 1 ][GREETER]
[ Breakfast ]<NO >|[ Morning ]<NO >
[ Lunch ]<NO >|[ Afternoon ]<NO >
i
3. Using the
5
,
6
,
4
,
3
and
Enter
keys, select a message number
and day of the week to configure.
Msg.<001><MON>
4. For the selected message, set the value to “YES” for each daypart the message is active,
[ Breakfast ] <YES>
, leaving the other dayparts set to
[ Morning ] <NO >
5. Repeat the daypart assignments for each day of the week.
Msg.<001><TUE>
6. When done, activate the message schedule by selecting “YES”.
Act.<YES>
7. Repeat steps 3 - 6 for each message you wish to schedule and activate.
Record Message
After determining the number and type of messages to use in the drive-thru operation,
the user will then record each message into the Greeter Module memory.
Perform the following procedure to record and playback messages:
8. Enter the greeter configuration menu.
9. Select
2 Record Messages
.
