3M XT-1 Quick Start Manual Download Page 3

Page: 3 / 3

3. Record serial numbers of the three components

• Orient the three components in the manner illustrated below to reveal the component’s serial number – highlighted in
yellow on each component.

3. Follow the procedure to disassemble the XT-1 Headset and record it’s serial number

• Remove the ear cup off the headset speaker

-- Remove the ear pad by using your fingers to pull

the ear pad from the ear cup.

-- Then grasp the headset firmly in one hand, and pull

the ear cup off the speaker with the fingers of the
other hand.

• Record serial numbers of the headset

G5 Carrier

G5 Control Pod

G5 Battery

Commercial Solutions Division

3M Center, Building 223-2N-21
St. Paul, MN 55144-1000
www.3M.com/drivethru

Summary of Contents for XT-1

Page 1: ...the G5 Carrier and inspecting each component Removing the Ear Cup from the XT 1 headset Another method to identify the XT 1 headset s or the G5 Control Pod s serial number without having to disassemb...

Page 2: ...inger nail gently pull the discharged battery from the battery housing Once dislodged you may use your thumb and remaining fingers to completely slide the battery out of the headset 2 Separate the G5...

Page 3: ...he headset speaker Remove the ear pad by using your fingers to pull the ear pad from the ear cup Then grasp the headset firmly in one hand and pull the ear cup off the speaker with the fingers of the...