3M X56 Operator'S Manual Download

Page: 27 / 104

3M™ Digital Projector X56

Operating

Using the magnify feature

MAGNIFY

ON/OFF

button

PAGE UP

PAGE

DOWN

VIDEO

MY SOURCE/

DOC.CAMERA

STANDBY/ON

FREEZE

MAGNIFY

ASPECT

AUTO

BLANK

MUTE

VOLUME

KEYSTONE

MY BUTTON

POSITION

ESC

ENTER

RESET

COMPUTER

3.
4.

Press the

MAGNIFY ON

button on the remote control.

The picture will be magnified, and the MAGNIFY dialog will

appear on the screen. When the

MAGNIFY ON

button is

pressed for the first time after the projector is turned on, the

picture will be zoomed by 1.5 times. On the dialog, triangle

marks to show each direction will be displayed.
While the triangles are displayed on the dialog, use the

▲/▼/◄/► cursor buttons to shift the magnifying area.

A magnifying glass icon will be displayed when the

MAGNIFY ON

button is

pressed while the dialog with the triangles is displayed.

While the magnifying glass icon is displayed on the dialog, use the ▲/▼ cursor

buttons to adjust the magnification ratio. The magnification ratio will be adjusted

with fine steps. And changes in the ratio in single steps are subtle so they may

be hard to recognize.

Press the

MAGNIFY OFF

button on the remote control to exit magnification.

● The MAGNIFY dialog will automatically disappear in several seconds with no

operation. The dialog will appear again if the

MAGNIFY ON

button is pressed

when the dialog has automatically disappeared.

● While the MAGNIFY dialog is displayed, press the

MAGNIFY ON

button to

switch the dialog between magnifying area shifting (with the triangles) and

magnification ratio adjustment (with the magnifying glass icon).

● The magnification is automatically disabled when the displaying signal or its

display condition is changed.

● While the magnification is active, the keystone distortion condition may vary.

It will be restored when the magnification is disabled.

● Some horizontal stripes might be visible on the image while magnification is

active.

● This function is not available in the following cases:

- The

USB TYPE A

port is selected as the input source.

- A sync signal in the range not supported is input.

- There is no input signal.

Summary of Contents for X56









































































































Search results

Summary of Contents for X56

Reviews:

Related manuals for X56

Brands by name

Popular brands

3M X56, Operator'S Manual

Search results

Summary of Contents for X56

Reviews:

Related manuals for X56

Brands by name

Popular brands