56 • Ch. 6 Performing Field Repairs
SST Transport and Burster Mechanism Manual
❑
The 50-pin cable which connects the PCB-4 Board to the Breakout Board.
❑
The 26-pin and 16-pin cables which connect the PCB-3 Board to the PCB-4
Board.
Note:
Upper maghead connectors are on the bottom of PCB-4 on HP-4 only.
7. Remove the Phillips screws fastening the PCB-4 Board to the top of the SST/HP-4 Trans-
port.
8. Remove and replace with a new PCB-4 Board.
9. Replace the Phillips screws.
10. If you are working on the SST/HP1 Transport, replace the stepper motor. Adjust the Upper
Belt to specifications as needed.
11. Plug in the following connections:
❑
The 50-pin cable which connects the PCB-4 Board to the Breakout Board.
❑
The 26-pin and 16-pin cables which connect the PCB-3 Board to the PCB-4
Board.
12. If you have no additional repairs to perform, return the SST/HP-4 Transport to the device
cabinet.
13. Restore power to the device.
Figure 6.5
PCB-4 Board
26-Pin Connector
Phillips Screws
50-Pin
Connector
16-Pin Connector
Summary of Contents for SST
