System tested and certified by NSF International against Std 58 and CSA
B483.1 for the reduction of claims listed on the Performance Data Sheet.
3M and ScaleGard are trademarks of 3M Company.
NSF is a trademark of NSF International.
All other trademarks are the property of their
respective owners.
Please recycle. Printed in USA.
© 2017 3M Company. All rights reserved.
34-XXXX-XXXX-X
400 Research Parkway
Meriden, CT 06540
Phone
1-866-990-9785
WW
1-203-237-5541
Fax
1-203-238-8701
Web
Product Selection and Use:
Many factors beyond 3M’s control and uniquely within user’s knowledge
and control can affect the use and performance of a 3M product in a particular application. As a result,
customer is solely responsible for evaluating the product and determining whether it is appropriate and
suitable for customer’s application, including conducting a workplace hazard assessment and reviewing
all applicable regulations and standards (e.g., OSHA, ANSI, etc.). Failure to properly evaluate, select,
and use a 3M product and appropriate safety products, or to meet all applicable safety regulations,
may result in injury, sickness, death, and/or harm to property.
Warranty, Limited Remedy, and Disclaimer:
3M warrants that this product (excluding filter cartridge
or filter membrane) will be free from defects in material and manufacture for the period of one
(1) year from the date of purchase. The filter cartridge or membrane is warranted to be free from
defects in material and manufacture for one (1) year. No warranty is given as to the service life of any
filter cartridge or membrane as it will vary with local water conditions and water consumption. 3M
MAKES NO OTHER WARRANTIES OR CONDITIONS, EXPRESS OR IMPLIED, INCLUDING, BUT NOT
LIMITED TO, ANY IMPLIED WARRANTY OR CONDITION OF MERCHANTABILITY, FITNESS FOR A
PARTICULAR PURPOSE, OR ARISING OUT OF A COURSE OF DEALING, CUSTOM, OR USAGE OF
TRADE. This warranty does not cover labor. If this 3M product does not conform to this warranty,
then the sole and exclusive remedy is, at 3M’s option, replacement of the 3M product or refund of the
purchase price. This warranty gives you specific legal rights, and you may have other rights which may
vary from state to state, or country to country. For any warranty questions, please call 866.990.9785
or mail your request to: Warranty Claims, 3M Purification Inc., 400 Research Parkway, Meriden, CT
06450. Proof of purchase (original sales receipt) must accompany the warranty claim, along with a
complete description of the Product, model number and alleged defect.
Limitation of Liability:
Except for the limited remedy stated above, and except to the extent prohibited
by law, 3M will not be liable for any loss or damage arising from or related to the 3M product, whether
direct, indirect, special, incidental, or consequential (including, but not limited to, lost profits or
business opportunity), regardless of the legal or equitable theory asserted, including, but not limited to,
warranty, contract, negligence, or strict liability.
Step 8: Perform Start-Up Procedure
1) Check and adjust tank air pressure. Air pressure should be between 8-10 psi. Refer to
installation manual if air pressure needs to be adjusted.
1) Check that all plumbing connections are secure.
2) Open the tank shut-off valve and inlet water valve.
3) Open shut-off valve on the beverage filter system and check for leaks.
4) Divert the water sample valve outlet to drain. Open valve and let water run to drain for 10
minutes.
5) Close water sample valve.
6) Allow tank to fill (approximately 60 mins).
7) Repeat steps 3-5.
8) System is now ready for use.
9) Refer to system manual for replacement and operating instructions
