background image

Step 1: Unpack the SGLP-RO System

Check that all of the parts listed below are included in the packaging. Should any parts be 

missing, please contact 3M at (866) 990-9785.

Item Description

1

Tank and Bracket Assembly (incl. Permeate Pump)

2

ScaleGard™ PreFilter (Part # 5570613)

3

ScaleGard™ RO Membrane (Part #5598729)

4

Water Sample Valve Assembly

5

1’ Length of 3/8” Tubing (not shown)

6

10’ Length of Red Tubing (not shown)

7

Adapter – Stem X Barb (1/4” x 1/4”)

8

Adapter – Stem X Barb (3/8” x 1/4”)

9

Reducer – Stem X Quik Connect (3/8” x 1/4”) 

10

Filter Plug

1

2

3

10

4

8

9

7

NOTICE (continued):

To reduce the risk associated with property damage due to water leakage or flooding:

• 

Where a booster pump is installed on a water system, you MUST install an appropriate pressure relief 

valve.  Pressure relief valve must be maintained and inspected every 6 months.  Contact a plumbing 

professional if you are uncertain how select/install/maintain a pressure relief valve.

• 

Where a booster pump is installed on a water system, you MUST install an appropriate pressure 

regulating valve and regulate water pressure to <80psi.  Contact a plumbing professional if you are 

uncertain how select/install/maintain a pressure regulating valve.

• DO NOT

 install in direct sunlight or outdoors.

• DO NOT

 install near water pipes which will be in path of a drilling tool when selecting the position to 

mount the bracket.

• 

Mount filter in such a position as to prevent it from being struck by other items used in the area of 

installation.

• Ensure that the location and fasteners will support the weight of the system when installed and full of 

water.

• 

Ensure all tubing and fittings are secure and free of leaks.

• DO NOT

 install unit if collet is missing. Contact 3M™ Water Filtration Products if collets are missing from 

any fittings.

• 

Use compatible flexible tubing with ‘push in connections’ (such as PEX tubing, PE tubing, PP tubing).

• DO NOT

 install with rigid piping (such as copper, aluminum, stainless steel, chrome plated, or anodized 

tubing).

IMPORTANT NOTES:

• Failure to follow instructions will void warranty.

3

Summary of Contents for SGLP-RO









Reviews: