3M SCP716W, Operator'S Manual

Page: 28 / 36

28
Operator’s Guide 3M
™
Super Close Projection System SCP716W
© 3M 2009. All Rights Reserved.
ENGLISH
Advanced Setup Menu
The Advanced Setup Menu, shown below, is used to initiate the PIN code feature (turn On/Off) and set the
PIN code.
6HWXS 3,1 ,QSXW6RXUFH&RPSXWHU
3,1$XWKHQWLFDWLRQ 2II X
1HWZRUN&RQWURO 2Q X
&KDQJH3,1 Â X
Feature Description Range Default
PIN Authentication Turn the PIN code security feature On or Off. N/A Off
Set PIN code
Change the 4-digit PIN access code as desired.
Note: When PIN security is enabled, the PIN access
code will automatically set to the default value 3349.
0–9 3349
Network Control
Turns the network control function on and off. The
network control feature allows a computer to open
the control web page on I/O module and control the
projector.
To view the control web page, connect the I/O
module into the local area network and type the
I/O module's IP address into the address bar of a
web browser. (The IP address can be found in the
projector’s information menu. See the next page.)
The control web page will display. A RS-232 and
network control guide is available at www.mmm.
com\meetings in the Technical Documents section.
On/Off On
28
ENGLISH