11
Operator’s Guide
3M
™
Super Close Projection System SCP716W
© 3M 2009. All Rights Reserved.
ENGLISH
CAUTION
To reduce the risk associated with intense visible light:
• Avoid looking directly into the projector lens while the lamp is on.
To reduce the risk associated with impact of a falling projector:
• Use only the 3M brand wall/ceiling mounting hardware kit if wall or ceiling mounting is desired.
• Installation of the 3M brand wall/ceiling kit must only be performed by qualified personnel.
• Adhere strictly to the proper installation procedure as outlined in the installation instructions when
installing the 3M Wall/Ceiling kit.
• Always operate the unit on a flat and sturdy surface.
To reduce the risk associated with explosion, and/or chemicals from leaking battery:
• Use only with battery type AAA.
• Orient the battery’s plus (+) and minus (-) terminals according to the markings found on the remote
control.
• Do not leave the battery in the remote for an extended period of time.
• Do not heat, disassemble, short, recharge, or expose the batteries to fire or high temperature.
• Do not carry batteries loose in your pocket or purse.
• Avoid eye and skin contact in the event that battery would leak.
• Do not mix used and new batteries.
To reduce the risk associated with tripping, and/or impact:
• Position the power cord and cables so that they can not be tripped over.
To reduce the risk associated with environmental contamination:
• Dispose of mercury lamp, exhausted batteries, and other electronic components in accordance with
applicable federal, state and local regulations.
To reduce the risk associated with hot surface of lamp cartridge:
• Before replacing the lamp, allow the lamp to cool for 60 minutes and then unplug the projector
from the electrical outlet.
To reduce the risk associated with environmental contamination due to mercury:
• Hg: Lamp contains mercury. Don’t throw in trash. Dispose according to local, state, or federal laws.
See www.lamprecycle.org or call 1-800-328-1371.
SAVE THESE INSTRUCTIONS
Summary of Contents for SCP716W
Page 2: ......