3M
™
Super Close Projection System SCP716/SCP716W
Product Safety Guide
©
3M 2009. All Rights Reserved
2
Warranty; Limited Remedy; Limited Liability
This warranty applies to the continental US only. The warranty terms, conditions, remedy and limitations may vary in other countries.
Contact your local 3M Company for warranty information.
The 3M SCP700 Series projector (the “3M Product”) is warranted to be free from defects in material or manufacture for a period of three
(3) years from the date of purchase or 4,000 hours of usage, whichever occurs first.
All other accessories of the 3M Product (those in the applicable modular configurations), excluding the projector lamps, but including the
wall mounts, ceiling mounts, digital annotation sensors, and input/output devices are warranted to be free from defects in material or
manufacture for a period of one (1) year from the date of purchase.
The lamp component of the 3M Product is warranted to be free from defects in material and manufacture for a period of ninety (90) days
after the date of purchase of the 3M Product or 180 hours of lamp usage, whichever occurs first. This warranty is for parts only and in the
case of an approved warranty claim for a lamp; your exclusive remedy will be for a replacement product shipped to your location.
Optional product upgrades and/or accessories that are not sold as part of any modular configuration are subject to individual warranties.
THE WARRANTIES STATED ABOVE ARE EXCLUSIVE AND ARE MADE IN PLACE OF ANY AND ALL WARRANTIES,
EXPRESS OR IMPLIED WARRANTIES OR CONDITIONS, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY
OR FITNESS FOR A PARTICULAR PURPOSE, OR ANY INDUSTRY PRACTICE OR CUSTOM OR TRADE USAGE.
In the event the 3M Product fails to conform to the above stated warranties within the applicable warranty period, your exclusive remedy
shall be, at 3M’s option, to replace or repair the 3M Product or to refund the purchase price of the 3M Product. All replaced parts or
products become property of 3M. If the product is repaired, 3M will repair the defective part(s) with a new or used part(s). If the 3M
Product is replaced, 3M will replace the 3M Product with the same or equivalent model and with a new or refurbished 3M Product. In the
case of an approved warranty claim, the replacement 3M Product will carry only the remaining term of the original 3M Product’s
warranty period as stated above.
For warranty service, you must provide proof of the date of the original purchase else the
manufacturing code date will be used to establish the start date of the warranty.
The following are exclusions to the above listed
warranty:
a.
This warranty does not cover 3M Product that is modified or damaged through improper storage, misuse, abuse, accident, vandalism,
improper installation, neglect, improper shipping, damage caused by acts of war, disasters such as fire, flood, and lightning, improper
electrical current, software problems, interaction with non-3M products, or service other than by a 3M Authorized Service Provider,
neglect or mishandling by any person. Normal wear and tear is not covered under warranty.
b.
3M Product is designed to operate in the typical indoor environment. This warranty does not cover 3M Product used outside of the
following circumstances:
•
100V-240V AC, 50/60 Hz
•
Office (or similar) Environments with low levels of smoke or air born particulates.
Altitude Temperature
Humidity
0-4000 ft (normal fan speed)
5
℃
- 35
℃
(41
℉
- 95
℉
)
4000-6000 ft (high fan speed)
5
℃
- 35
℃
(41
℉
- 95
℉
)
25% to 80% (non-condensing)
•
Storage conditions: -20
℃
to 60
℃
, maximum 40,000 ft.
c.
The Air Intake and Exhaust Vent must be clear of obstructions, including any potential blockage or obstructions caused from a
ceiling or other mount. Inadequate air ventilation will cause the 3M Product to malfunction or will cause damage to the 3M Product
which will void the warranty.
d.
This warranty does not cover any additional costs including, but not limited to, those associated with removal, cleaning or
installation of the 3M Product, adjustments, (mechanical or electronic) made to the 3M Product or replacing customer replaceable
parts like lamps and air filters.
e.
This warranty covers only normal use of the product. 24-hour-per-day or other excessive continual use causes strain and is not
considered normal use.
f.
This warranty does not cover consumables (e.g., fuses), other than lamps and only as set forth below.
g.
This warranty is not transferable.
h.
3M is not responsible for warranty service should the 3M label or logo or the rating label or serial number be removed unless
otherwise stated in writing for the purpose of private labeling for partnership requirements.
i.
This warranty does not cover postage, insurance, or shipping costs incurred in presenting your 3M Product for warranty service. Said
costs are the customer’s responsibility. If a claimed defect cannot be identified or reproduced in service, the customer may be held
responsible for cost incurred. Should your warranty upgrade include a “change out” service and the claimed defect cannot be
identified or reproduced by the technician, the customer will be responsible for call out costs.
