background image

This laminator is designed for use with thermal laminating pouches for paper or flat 
paper-like items between two film layers. It is intended for home, home office or 
small office, and school use. 

INTENDED USE:

LAMINATING MACHINE IS NOT INTENDED FOR USE BY CHILDREN. Currency, 
Social Security cards, thermal papers, stamps, credit cards, cards with a magnetic 
strip and other similar items. Also, do not use sharp objects, heat sensitive materials, 
historically significant papers or one-of-a-kind items. Use in any other application 
has not been evaluated by 3M and may lead to an unsafe condition.

NOT FOR USE:

To reduce the risks associated with fire and hot surfaces which, if not avoided, 
could result in serious injury or death:

• Do not place laminating film or any items on top of laminator.

To reduce the risks associated with hot surfaces which, if not avoided, could 
result in minor or moderate injury:

• Laminating machine is not intended for use by children.
• Place unit on a flat, secure, hard, stable surface.
• Do not cover the vent holes on the bottom or sides of the laminator while the 

power is on.

• The laminating machine and laminated items become hot during use.
• Allow laminated items to cool before handling.
• Do not leave the laminator unattended while turned on or in use.
• Unplug the laminator from electrical outlet before storage or when not in use.
• Allow the laminator to cool before moving or storing.

To reduce the risks associated with environmental contamination:

• Dispose of electronic waste in accordance with applicable local and 

government regulations.

WARNING

To reduce the risks associated with hazardous voltage and fire which, if not avoided, could result in serious 

injury or death:

• Before using the laminator, plug it into an electrical outlet that is near the laminator and easily accessible.
• Only connect laminator to a grounded 120V outlet.
• Do not use this machine with a voltage or outlet converter.
• Do not operate the laminating machine if it has a damaged power cord or plug, if it is not working 

properly, or if it has been dropped or damaged.

• Keep power cord away from hot surfaces.
• Do not use laminator in wet environments. The laminator is intended for indoor use only.
• Unplug the laminator from electrical outlet before storage or when not in use.
• Do not pull on the cord to unplug the laminator. Unplug the power cord by pulling straight out on the plug.
• Do not remove the outer housing or attempt to service or repair the machine yourself. The laminator 

contains no user serviceable parts.

WARNING

CAUTION

CAUTION

Summary of Contents for Scotch TL902







Reviews: