To prevent damage to the device and laminated items:
• Use laminator only as stated in the intended use statement.
• This product is designed and intended to be used in the US and Canada only.
Use outside the US and Canada has not been evaluated by 3M. Product may
not meet regulatory requirements outside of US and Canada.
NOTICE
Explanation of Signal Word Consequences:
WARNING:
Indicates a hazardous situation which, if not avoided, could result in serious injury or death
CAUTION:
Indicates a hazardous situation which, if not avoided, could result in a minor or moderate
injury or property damage
NOTICE:
Indicates a situation which, if not avoided, could result in property damage
FCC Language:
Supplier's Declaration of Conformity for the following 3M Company manufactured product(s):
Trade Name: Scotch™ Thermal Laminator
Model(s): TL902
We hereby declare that this product(s) complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions:
1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause
undesired operation
Note: This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses and can radiate
radio frequency energy and, if not installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Modifications to this device shall not be made without the written consent of 3M Company.
Unauthorized modifications may void the authority granted under Federal Communication Rules
permitting the operation of this device.
Responsible Party – US Contact information:
For more information or help with your
Scotch™ Thermal Laminator, call the 3M Help Line:
1-800-772-4337
For project ideas and more, visit us at:
www.scotchbrand.com/laminating
3M, Stationery and Office Supplies Division
3M Center, St. Paul, MN 55144-1000
