78-8126-9537-3-B
13
5.14 Select the Silicone Insulator Assembly (long tubular assembly) from the kit. Slide the Silicone Insulator
Assembly over the lug and cable with the loose core end toward the cable jacket. Overlap the lug seal insulator,
and align the Silicone Insulator Assembly Tube (not the core) with the end of the lug seal. Remove the core by
pulling the loose end while unwinding counter-clockwise. (
Figure 22
)
5NWINDCOUNTERCLOCKWISE
3ILICONE)NSULATOR!SSEMBLY4UBE
'ROUND"RAIDS
!LIGNWITHENDOFLUGSEALINSULATORTUBE
Figure 22
5.15 Clean the Silicone Insulator Assembly Tube with an approved cable cleaner and wipe dry.
5.16 Select the Skirted Insulator Assembly from the kit. Carefully remove the
red
shipping core by pulling the loose
end while unwinding counter-clockwise and discard. Slide the Skirted Insulator Assembly over the lug and
cable with the loose core end toward the cable jacket. Align the Skirted Insulator Assembly Tube (not the core)
with the leading edge of the previously installed Silicone Insulator Assembly Tube. Remove the core by pulling
the loose end while unwinding counter-clockwise. (
Figure 23
)
5NWINDCOUNTERCLOCKWISE
3KIRTED)NSULATOR!SSEMBLY4UBE
'ROUND"RAIDS
!LIGNWITHENDOF
3ILICONE)NSULATOR
!SSEMBLY4UBE
Figure 23
5.17 Connect the completed termination to equipment/system following standard practice.
5.18 Connect the ground braid to the ground system following standard practice.
