3M PL300 User Manual Download Page 30

Page: 30 / 32

Troubleshooting

Review the following possible solutions if you encounter a problem while using your printer.

Problem/Error Message

Solution

Battery Low

Battery Empty

• Attach the power adapter.
• Recharge the battery pack. See

Recharging the Battery

Pack

• Insert new AA alkaline batteries as a temporary power

source. AA batteries are less stable and should be used as a
temporary solution only.

Poor Print Quality

• Clean the print head. See

Cleaning Your Printer

• Adjust the Print Contrast. See

Adjusting Print Contrast

Tape Jam

Motor is stalled due to tape jam.

• Open the tape cartridge compartment and press the eject

button to release the cartridge.

• Remove the tape, clearing the jam.
• Make sure the tape passes smoothly through the

guideposts on the tape cartridge. See

Inserting and

Removing the Tape Cartridge

• When the jam is cleared, press

to clear the display.

Uneven or slanted printing

The cartridge is not inserted correctly.

• Check the tape cartridge compartment to make sure the

cartridge is inserted properly. See

Inserting and

Removing the Tape Cartridge

• Make sure the two levers in the tape compartment are

locked on either side of the cartridge holding the cartridge
in place.

Cannot close the tape cartridge lid

The cartridge is not inserted correctly.

Make sure nothing is blocking the cartridge cover and that the
tape cartridge is inserted properly. See

Inserting and

Removing the Tape Cartridge

Unable to return to the previous menu

• Press

Esc

to return to the previous menu.

• Press

Clr

to return to return to the display and clear all

settings.

Nothing shows on the display

• Ensure the printer is turned on.
• Recharge battery pack or plug in power adapter.
• Remove power adapter and batteries and then reattach

power to restart the printer.

End of Tape

Tape cartridge is empty.

The printer cannot detect the end of the tape cartridge. Make
sure you have tape left in the cartridge before starting a large
print job.

Summary of Contents for PL300

































Search results

Summary of Contents for PL300

Reviews:

Related manuals for PL300

Brands by name

Popular brands

3M PL300, User Manual

Search results

Summary of Contents for PL300

Reviews:

Related manuals for PL300

Brands by name

Popular brands