3M PELTOR WS MT73H74610WS6NA Series Manual Download Page 16

7

3M™ PELTOR™ M171/2 Wind shield for level-dependent

microphones

Effective against wind noise; enhances life span and protects

the microphones. One pair per pack.

3M™ PELTOR™ ACK081 Battery

Supplied as standard with product.

NOTE:

 Use the following battery in this product: 3M™

PELTOR™ ACK081 charged with cable 3M™ PELTOR™

AL2AI connected to a 3M™ PELTOR™ FR08 (power supply).

3M™ PELTOR™ AL2AI Charging cable

USB cable connecting to ACK081.

3M™ PELTOR™ FR08 Power supply

Power supply for AL2AI/ACK081.

3M™ PELTOR™ FL5602 External PTT

Push-To-Talk button with connection cable for external control

of transmission with the built-in communication radio.

3M™ PELTOR™ FL6BT Connecting cable

With 3.5 mm mono connector for use with communication radios.

3M™ PELTOR™ FL6BS Connecting cable

With 2.5 mm mono connector for use with communication radios.

3M™ PELTOR™ FL6BR Connecting cable

With Peltor J11 connector (type Nexus TP-120) for use with a

Peltor adapter and an external communication radio. Contact

your 3M Peltor dealer for information.

FCC AND ISED INFORMATION

This device contains licence-exempt transmitter(s)/

receiver(s) that comply with Innovation,Science and Economic

Development Canada’s licence-exempt RSS(s)   Operation is

subject to the following two conditions: (1) This device may not

cause harmful interference, and (2) this device must accept any

interference received, including interference that may cause

undesirable operation.

NOTE:

 This device complies with part 15 of the Rules. 

Operation is subject to the following two conditions:(1) This 

device may not cause harmful, and (2)this device must accept 

any interference received, including interference that may 

cause usdesired operation.However, there is no guarantee that 

interference will not occur in a particular installation. If this device 

does cause harmful interference, which can be determined by 

turning the device off and on, the user is encouraged to try to 

correct the interferenceby one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation distance between the two interfering

devices.

• Consult 3M Technical Services.

CAN ICES-3 (B)/NMB-3(B)

WARRANTY AND LIMITATION OF LIABILITY 

NOTE: 

The following statements do not apply in Australia and 

New Zealand. Consumers should rely on their statutory rights.

WARRANTY:

 In the event any 3M Personal Safety Division 

product is found to be defective in material, workmanship, or not 

in conformity with any express warranty for a specific purpose, 

3M’s only obligation and your exclusive remedy shall be at 3M’s 

option, to repair, replace, or refund the purchase price of such 

parts or products upon timely notification of the issue by you 

and substantation that the product has been stored, maintained, 

and used in accordance with 3M’s written instructions. 

EXCEPT WHERE PROHIBITED BY LAW, THIS WARRANTY 

IS EXCLUSIVE AND IS IN LIEU OF ANY EXPRESS OR 

IMPLIED WARRANTY OF MERCHANTABILITY, FITNESS 

FOR A PARTICULAR PURPOSE OR OTHER WARRANTY 

OF QUALITY, OR THOSE ARISING FROM A COURSE OF 

DEALING, CUSTOM, OR USAGE OF TRADE, EXCEPT OF 

TITLE AND AGAINST PATENT INFRINGEMENT. 3M has no 

obligation under this warranty with respect to any product that 

has failed due to inadequate or improper storage, handling, or 

maintenance; failure to follow product instructions; or alteration or 

damage to the product caused by accident, neglect, or misuse.

LIMITATION OF LIABILITY: EXCEPT WHERE PROHIBITED BY 

LAW, IN NO EVENT SHALL 3M BE LIABLE FOR ANY DIRECT, 

INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL 

LOSS OR DAMAGES (INCLUDING LOST PROFITS) ARISING 

FROM THIS PRODUCT, REGARDLESS OF THE LEGAL 

THEORY ASSERTED. THE REMEDIES SET FORTH HEREIN 

ARE EXCLUSIVE.

NO MODIFICATION: Modifications to this device shall not be 

made without the written consent of 3M Company.  

Unauthorized modifications may void the warranty and the 

user’s authority to operate the device.

To properly dispose of the battery, follow local solid waste 

disposal regulations. Many rechargeable batteries are required 

to be recycled by local, state/province, and national laws. To 

properly recycle/dispose of the battery or battery pack, always 

follow local solid waste disposal regulations. Additionally, in 

the United States and Canada, 3M Company is partnering 

with Call2Recycle (RBRC) to provide recycling service to 

you to help ensure that the rechargeable batteries within our 

products are recycled properly. To assist you in using this 

service call the Call2Recycle battery recycling information 

help line at 1-800-8-BATTERY (1-800-822-8837) or consult 

Call2Recycle’s battery recycling guidance online at “http://

www.call2recycle.org” www.call2recycle.org.

EN

FCC AND ISED INFORMATION

This device contains licence-exempt transmitter(s)/

receiver(s) that comply with Innovation,Science and Economic 

Development Canada’s licence-exempt RSS(s)   Operation is 

Summary of Contents for PELTOR WS MT73H74610WS6NA Series



































Reviews: