3M PELTOR LiteCom Plus MT7H7 4410-EU Series, Manual, Page: 13 / 268

13 14
(N) CTCSS (Continuous Tone Coded Squelch System)
1. 67.0 8. 88.5 15. 110.9 22. 141.3 29. 179.9 36. 233.6
2. 71.9 9. 91.5 16. 114.8 23. 146.2 30. 186.2 37. 241.8
3. 74.4 10. 94.8 17. 118.8 24. 151.4 31. 192.8 38. 250.3
4. 77.0 11. 97.4 18. 123.0 25. 156.7 32. 203.5
5. 79.7 12. 100.0 19. 127.3 26. 162.2 33. 210.7
6. 82.5 13. 103.5 20. 131.8 27. 167.9 34. 218.1
7. 85.4 14. 107.2 21. 136.5 28. 173.8 35. 225.7
(O) DCS (Digital Coded Squelch)
39. 023 53. 114 67. 174 81. 315 95. 445 109. 631
40. 025 54. 115 68. 205 82. 331 96. 464 110. 632
41. 026 55. 116 69. 223 83. 343 97. 465 111. 654
42. 031 56. 125 70. 226 84. 346 98. 466 112. 662
43. 032 57. 131 71. 243 85. 351 99. 503 113. 664
44. 043 58. 132 72. 244 86. 364 100. 506 114. 703
45. 047 59. 134 73. 245 87. 365 101. 516 115. 712
46. 051 60. 143 74. 251 88. 371 102. 532 116. 723
47. 054 61. 152 75. 261 89. 411 103. 546 117. 731
48. 065 62. 155 76. 263 90. 412 104. 565 118. 732
49. 071 63. 156 77. 265 91. 413 105. 606 119. 734
50. 072 64. 162 78. 271 92. 423 106. 612 120. 743
51. 073 65. 165 79. 306 93. 431 107. 624 121. 754
52. 074 66. 172 80. 311 94. 432 108. 627
5.2.3 Power (radio transmitted output)
There are two output power levels, high and low. Use as low output as possible to maximise the run time.
Press the + button (E:11) or – button (E:12) to set the level. Each change is confirmed by a voice message.
5.3 Set up menu (configuration menu)
The configuration menu gives access to more advanced settings for the headset. This menu is accessed in power off mode
by pressing the PTT auxiliary button (E:16) and the On/Off/Mode button (E:10) at the same time. To exit the set up menu
press and hold the On/Off/Mode button (E:10) for 2 seconds and the headset will be turned off.
5.3.1 BCLO (Busy channel lockout)
This menu setting let you change the way the headset reacts when you try to transmit on a busy channel.
There are two options to choose from: “carrier” and “sub channel” (code) with or without a warning tone. If you want the
headset to respond to the carrier wave, select the “carrier” option; if you want it to react to the sub channel, choose the
“sub channel” option. Press the + button (E:11) or – button (E:12) to select the BCLO setting. Each change is confirmed by
a voice message.
5.3.2 Max transmission time
This function lets you adjust the maximum transmission time. The time can be chosen between 30 seconds up to 5
minutes and off-mode. Press the + button (E:11) or – button (E:12) to adjust the maximum transmission time. Each change
is confirmed by a voice message
GB