3M Multimedia Projector S40, Safety Manual

Page: 13 / 96

3M™ Multimedia Projector S40/X40 Product Safety Guide © 3M 2003 13
Warranty
LIMITED WARRANTY
3M warrants this product against any defects in material and workmanship, under normal usage and storage, for a period of two
years from date of purchase. Proof of purchase date will be required with any warranty claim. In the event this product is found to
be defective within the warranty period, 3M’s only obligation and your exclusive remedy shall be replacement of any defective
parts (labor included).
To obtain warranty service, immediately notify the dealer from which you purchased the product of any defects. In the USA call
1-800-328-1371 for warranty or repair service.
LIMITATION OF LIABILITY
THE FOREGOING WARRANTY IS MADE IN LIEU OF ALL OTHER WARRANTIES, EXPRESSED OR IMPLIED, AND 3M
SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTY OF MERCHANTIBILITY AND FITNESS. 3M SHALL NOT BE
LIABLE FOR ANY DAMAGES, DIRECT, CONSEQUENTIAL, OR INCIDENTAL, ARISING OUT OF THE USE OR
INABILITY TO USE THIS PRODUCT.
Important: The above warranty shall be void if the customer fails to operate product in accordance with 3M’s written
instructions. This warranty gives you specific legal rights and you may have other rights which vary from state to state.
FCC STATEMENT - CLASS B: This equipment generates, uses and can radiate radio frequency energy, and if not installed and
used in accordance with the instruction manual may cause interference to radio communications. It has been tested and found to
comply with the limits for a Class “B” computing device pursuant to Subpart B of Part 15 of the FCC Rules, which are designed
to provide reasonable protection against such interference when operated in a residential installation.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged
to try to correct the interference by one or more of the following measures:
* Reorient or relocate the receiving antenna.
* Increase the separation between the equipment and receiver.
* Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
* Consult the dealer or an experienced radio/TV technician for help.
INSTRUCTIONS TO USERS : This equipment complies with the requirements of FCC equipment provided that the following
conditions are met. The cables may have to be used with the core set to the projector side. Use the cables which are included with
the projector or specified.
Note : Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to
operate the equipment.
EEC STATEMENT: This machine was tested against the 89/336/EEC (European Economic Community) for EMC (Electro
Magnetic Compatibility) and fulfills these requirements.
Video Signal Cables: Double shielded coaxial cables (FCC shield cable) must be used and the outer shield must be connected to
the ground. If normal coaxial cables are used, the cable must be enclosed in metal pipes or in a similar way to reduce the
interference noise radiation.
Video Inputs: The input signal amplitude must not exceed the specified level.
PATENTS, TRADEMARKS & COPY RIGHTS
IBM is a registered trademark of International Business Machines Corporation . Apple Macintosh and Apple Powerbook are
registered trademarks of Apple Computer, Inc . Microsoft and Windows 95 & Windows 98 are registered trademarks, and
Windows and Windows for Workgroups are trademarks of the Microsoft Corporation . Toshiba is a registered trademark of
Toshiba Corporation . Kensington is a trademark of Kensington Corporation. All other products are trademarks or registered
trademarks of their respective companies.
ENGLISH