background image

49

Troubleshooting

Regarding the indicator lamps (continued)

POWER 

indicator

LAMP 

indicator

TEMP 

indicator

Description

Blinking

In

Red

or

Lighting

In

Red

Turned

off

Blinking

In

Red

The cooling fan is not operating.

Please turn the power off, and allow the unit to cool 

down at least 20 minutes. After the projector has 

suffi ciently cooled down, please make confi rmation 

that no foreign matter has become caught in the fan, 

etc. and then turn the power on again.

If the same indication is displayed after the treatment, 

please contact your dealer or service company.

Blinking

In

Red

or

Lighting

In

Red

Turned

off

Lighting

In

Red

There is a possibility that the interior portion 

has become heated.

Please turn the power off, and allow the unit to cool 

down at least 20 minutes. After the projector has 

suffi ciently cooled down, please make confi rmation of 

the following items, and then turn the power on again.

• Is there blockage of the air passage aperture?

• Is the air fi lter dirty?

• Does the peripheral temperature exceed 35°C?

If the same indication is displayed after the treatment, 

please set the HIGH at the FAN SPEED of the item 

SERVICE of the OPTION menu. (

40

)

Lighting

In

Green

Alternative

blinking in 

Red

There is a possibility that the interior portion 

has become overcooled.

Please use the unit within the usage temperature 

parameters (5°C to 35°C). After the treatment, resent 

the power to ON.

Lighting

In

Green

Simultaneous

blinking in 

Red

It is time to clean the air fi lter.

Please immediately turn the power OFF, and clean 

or change the air fi lter by referring to the section “Air 

Filter”. After cleaning or changed the air fi lter, please 

be sure to reset the fi lter timer. After the treatment, 

resent the power to ON.

NOTE

  • When the interior portion has become overheated, for safety 

purposes, the power source is automatically turned off, and the indicator lamps 

may also be turned off. In such a case, press the “

” (OFF) side of the power 

switch, and wait at least 45 minutes. After the projector has suffi ciently cooled 

down, please make confi rmation of the attachment state of the lamp and lamp 

door, and then turn the power on again.

SALE on Projector Bulbs at www.BulbAmerica.com 

  take additional 5% Off with coupon code 5PDF 

 

Summary of Contents for Multimedia Projector S15
























































Reviews: