22
M150 FPD Monitor Installation Guide
3M Touch Systems Proprietary Information
Figure 6 Identifying Your Monitor Connections
2.
Connect one end of the video cable to the video connector on the FPD.
Connect the other end to the video card in your computer.
3.
Connect one end of the RS-232 serial touch screen cable to the FPD. Connect
the other end to an available serial communication (COM) port on the back of
your computer.
4.
Plug the AC/DC power supply into the M150 FPD. Be sure to use the power
supply included with the monitor or an equivalent class 2 rated (LPS) power
supply.
5.
Connect the power cable to the AC/DC supply. Connect the other end to the
appropriate AC outlet.
Figure 7 Connecting the M150 Cables to your Computer
You should be sure all cable connections are secure -- tighten all cable
screws. Shaking and vibration may dislodge cables that are improperly
connected.
Route all wiring and cabling away from heat sources and sharp metal edges
to avoid damage. Also, keep the touch screen cable away from sources of
electromagnetic and radio frequency interference.
Video connection
Power connection
Microphone and
speaker connections
Touch screen
connection
